GPM SERIES
HIGH CURRENT
BOLT CONNECTION TERMINAL BLOCKS

GP900

NEW_EMPTY

452.40 + VAT

PCS PER PACK4

In stock

In stock

High current terminal screw connection, 240 mm², beige
Panel mount version - M6 screws (recommended with screwdriver and washer slot)
Parallel cross connection available
EX.jpg
CESI 13 ATEX 038 U
I M2 Ex e I Mb
II 2 G Ex e IIC Gb
IECEx CES 13.0012U
Ex e I Mb
Ex e IIC Gb

Additional information

Series
Code
Type
HS code
Colour
TECHNICAL FEATURES
Function/Type
Rated cross-section
Connecting capacity
Flexible wire
Rigid wire
Wire with ferrule - ferrule type
Electrical characteristics according to IEC EN standard
Maximum voltage AC/DC
Maximum current (rated cross-section)
Caliber
Electrical characteristics according to ATEX directive and IEC Ex standard
Maximum voltage AC/DC
Maximum current (rated cross-section)
Operating temperature Min/Max
ensione impulsiva nom. / grado di inquinamento
Insulation stripping length
Tightening torque value (nom. / max.)
Widht (pitch)
Length
Height mounted on TH35-7.5/TH35-15/G32
Height for panel mounting
Lenght mounted on panel
Fixing distance between center
Insulation material temperature index (EN 60216-1)
Plastic material
ACCESSORIES
Cross-connection
Model A)
Rated current carrying capacity IEC/ATEX
Marking
Single marking tag
End bracket
TH35 screw type
TH35 snap-fit type
TH35 and G32 snap-fit type
Mounting rail
IEC 60715/TH35
IEC 60715/G32
APPROVALS AND MARKINGS

NOTES

For more details on accessories, refer to the relevant chapters

For further information see PDF catalog

Cabur
BT003
End bracket for rail type TH35, suitable for NU1051S, NU0851S,...
Cabur BT007 END BRACKETS BT SERIES
BT007
End bracket for rail type TH35, suitable for NU1051S, NU0851S,...
Cabur BT003 END BRACKETS BT SERIES
BT005
End bracket for rail type G32 and TH35, suitable for...
PX243
Permanent cross connection Exe PFX
PX242
Permanent cross connection Exe PFX
NU0851S
Tags for Cabur terminal blocks, PC+ABS, 8x5mm, White
NU1061S
Tags for Cabur terminal blocks, PC+ABS, 10x5mm, White
  • Mounting for both PR/DIN and PR/3 rails which meet IEC 60715 norms, “G32” and TH/35 types
  • Nominal voltage 1000 V
  • Panel mount version
  • Possibility of parallel cross connection
  • Available in the /BB (bar-bar), /BC (bar-cable), /CC (cablecable)
    versions
  • Available in grey and beige
  • Maximum continual operating temperature 130°C

Tightening reliability: the reliability of the connection (wire terminal or bar) is guaranteed by a screw and locking nut, with the interposition of a flat washer and an elastic washer, useful above all for countering the effects of the dynamic stresses. In the versions made ready for clamping of the conductors, without preparation. The reliability of the connection is ensured by the action and the particular wrapping shape of the clamping clip, the elastic reaction of which to the force pressing down on the conductor works as a lock under the head of the clamping screw, stopping it from loosening, even in the presence of vibrations. The conductor bar is also made with an appropriate concave seat so as to increase the grip of the conductors; in addition both the contact surface of the clamping clip and the concave part of the bar feature, along the entire length, crosswise channels that help to improve the connection characteristics, as regards both the mechanical retention of the conductors and the electrical contact, guaranteeing low contact resistances.

  • Protection for the “bar” versions: this protection which in the normal installation conditions has a longitudinal position with respect to the axis of the terminal block, can easily be rotated, using a simple screwdriver (as prescribed by the safety standards). In this way it is possible to access the connection unit to be able to work on the wire terminals or on the bars;
  • Protection for the “cable” versions: in this case the protection is fixed and snaps in: its development is orthogonal to the axis of the terminal block and it protects the collar, the clip and the clamping screw. It is worth
    noting the “shutter” device, fitted on the protection in axis to the terminal block and in line with the conductor introduction hole, which enables, with manual action in maximum conditions of safety, partial or total closing of the hole itself and consequently protection of the live parts, in the case of use of conductors with a much smaller section than the nominal one or cabling of the terminal block from only one side.

Mounting: for these power terminal blocks, owing to the notable dimensions and because they are subject to high stresses due to the forces generated by the conductors, a new hooking system has been studied and created. This enables it to be mounted indifferently on the various types of standard mounting rail (IEC 60715). The terminal block is unhooked simply using a screwdriver, inserted in the special slot provided in the hooking system (yellow part). If the mounting rail itself is installed on a flat wall, the dimensions of the GPM terminal blocks make it indispensable to use flat brackets to space the terminal board from the surface adequately. For each terminal block of the Series the version for direct fixing to a panel (/ FIX) is also available.

Marking: the GPM terminal blocks enable identification from both sides which can be done with both the CNU/8 (2 elements) and the CSC (up to 5 elements) type marking tags: the two possibilities are not alternatives, but can be combined.

Cross-connection: on this Series of terminal blocks it is also possible to create a cross connection between
2 or 3 adjacent terminal blocks using opportune cross
connections; to insert this accessory it is necessary to
remove the insulating baffle pre-engraved on the side wall of the insulating body.

IN THE SAME CATEGORY

Multi-polar cross connections “Easy Bridge Plus” for CBC.6 terminal block
Industrial connectivity solutions

Multi-polar cross connections “Easy Bridge Plus” for CBC.6 terminal block

The new “Easy Bridge Plus” multi-pole cross connections for CBC.6 terminal blocks are available in red or blue colours for instant visibility. If needed, the upper surface can be marked with a permanent marker to highlight the presence of the pole and of the electrical connection with the underlying terminal block in pole skipping cross connection configurations.

READ MORE »

ISCRIVITI ALLA NEWSLETTER

Name(Required)
Email(Required)
Address(Required)
Privacy(Required)
The consent to the subscription to the Cabur Newsletter can be revoked, at any time, using the unsubscribe procedure available on the emails sent. PRIVACY POLICY

CABUR CUSTOMER CARE

for technical support
+39 019 58999.219  customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it

from monday to friday 8:30-12:30 13:00-17:00