SERIE ISA
DC photovoltaic stringboxes with release coil

ISA0801CA10

NEW_EMPTY

4,757.00 + VAT

PCS PER PACK1

Out of stock

Out of stock

Temporarily not available for online purchase. Contact our sales department.

DC photovoltaic stringbox with release coil, 8 solar string inputs, 1 MPPT output, 1000 V

Up to 8 DC inputs from the Photovoltaic field
Up to 2 DC outputs to the Photovoltaic inverter
DC inputs/outputs based on Cabur Line 4 connectors
1 or 2 MPPT management
DC surge protective device
Suitable for 600V or 1000V systems
With fuse holders mounted on positive and negative circuits
With 230Vac release coil
CEI EN 61439-2 compliant

Additional information

Series
Code
Type
HS code
DC CIRCUIT
Number of Input (solar strings)
Number of Outputs MPPT
Max. Input Voltage
Max. Current for each string
Max. MPPT output current
Fuses
With fuse holder
Maximum rate
Type
Circuit breaker
Surge protective device
Nominal voltage Un
Protection level Up
Nominal discharge current 8/20 In
Input connection
Output connection
GENERAL DATA
Protection degree
Size (including connectors)
Standard compliancy
Release Coil

NOTES

(1) Our stringbox are sell without fuses, the choice of the correct size of fuse is mandatory by the customers.

For further information see PDF catalog

CABUR IS4FMN
IS4FMN
Couple of Cabur Solar connectors male and female 4-6mm²
CABUR
EVTAK016F8
Digital Current Transformer for EVO series
CABUR HM598GR
HM598GR
spring clamp terminal block with 1 diode 1N4007, 2.5 mm²,...
CABUR PM100
PM404
Pre-assembled cross connection PM, 4 poles, suitable for CBD.4, SCB.4
CABUR PM100
PM254
Pre-assembled cross connection PM, 4 poles, suitable for CBR.2
Cabur SF900 SCREW TERMINAL BLOCKS SFR - CBF SERIES 1 LEVEL FUSE-HOLDER
SF904
terminal block with diode, 4 mm², beige
CABUR SB205R
SB205R
Screw and sleeve, suitable for SCB.6
CABUR PHP0302B
PHP0302B
Cross connection PHP, 2 poles, white, suitable for BPL.4
CABUR PHP0302
PHP0302
Cross connection PHP, 2 poles, yellow, suitable for BPL.4
CABUR PHP02B
PHP02B
Cross connection PHP, 2 poles, white, suitable for BPL/R
CABUR PHP02
PHP02
Cross connection PHP, 2 poles, yellow, suitable for BPL/R
CABUR VP303
VP303
Flange for securing female connectors, colour grey, suitable for VPC.2...
CABUR VP502
VP502
Transparent protection for connectors inputs, 10 poles, suitable for VPD.2
CABUR VP102
VP102
Transparent protection for connector input, 10 poles, suitable for VPC.2...
TL202GR
Intermediate plate, colour grey, suitable for TLD.2/GR
TL202
Intermediate plate, colour beige, suitable for TLD.2
CABUR CPM01 PERMANENT CROSS CONNECTIONS PMP-CPM SERIES
CPX16
Screw and sleeve Exe CPX for PMP/25 plate
CABUR DU02S
DU02S
Separating plate, colour beige, suitable for VPC.2/GR, VPC.2/S/GR
CABUR DU02SGR
DU02SGR
Separating plate, colour grey, suitable for VPC.2/GR, VPC.2/S/GR
CABUR DU070R
DU070R
Red coloured partition, with direct fixing on the terminal block,...

Cabur Photovoltaic Stringboxes are composed by the
following main parts:

  1. Enclosure with solid and elegant design. It is suitable for external and internal ambient installations thanks to the IP65 degree protection.
  2. “Line 4” panel connectors that allow a fast and secure connection. These are equipped with caps to ensure a 65 degree protection.
  3. Surge protection devices: 20kA (8/20), available in 600Vdc or 1000Vdc version to match voltage effectively generated by the system.
  4. DC circuit breaker with 600Vdc or 1000Vdc nominal voltage. It’s ideal for protection and isolation for maintainance of solar strings in total safety. With handle and padlock.
  5. Thermal magnetic circuit breaker with RCCB, single phase and three phase, A or AC class, with 300mA sensibility and interruption power of 6kA or 10kA.
  6. AC SPD of 20kA, available on single phase and three
    phase version.

Every cabur photovoltaic electrical panel is provided together with all the documentation necessary to certify the photovoltaic system:

  • The installation manual with the risk assessment document, in compliance with CEI EN 61439-2.
    This document contains all information about possible risks during the installation and maintenance.
  • Electrical and front panel scheme, to be used during the installation to check the polarity of the connectors, the single-phase connections or the release coil.

The declaration of conformity of the photovoltaic electrical
panel can be provided on demand.

 

Advantages of the StringBox series

  1. Fast installation: components are already wired, able to connect using
    extractable connectors
  2. Standardised product, in conformance with the regulations in effect: ideal to minimize design and inspection times and costs
  3. Quality components in conformance with the regulations in effect
  4. Large product range able to satisfy a wide range of needs
  5. Box assembly completed and inspected by qualified personnel

Cabur is able to design string box on demand in compliance with the standard.
For information, please contact our sales network.
The choice of a particular type of stringboxes is left to the customer.
This choice depends on the configuration of the plant, the inverter type and the power of the photovoltaic systems.

ISL LINE

ISA LINE

ISB LINE

IN THE SAME CATEGORY

ISCRIVITI ALLA NEWSLETTER

Name(Required)
Email(Required)
Address(Required)
Privacy(Required)
The consent to the subscription to the Cabur Newsletter can be revoked, at any time, using the unsubscribe procedure available on the emails sent. PRIVACY POLICY

CABUR CUSTOMER CARE

for technical support
+39 019 58999.219  customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it

from monday to friday 8:30-12:30 13:00-17:00