CSF
Single phase power supplies

XCSF85C

NEW_EMPTY

138.20 + VAT

PCS PER PACK1

In stock

In stock

Single phase power supply IN: 120–230 Vac / OUT: 24 Vdc 3.5 A

Single phase and DC input
Short circuit, overload, input and output overvoltage protections
Over temperature protection
Suitable for applications that require high reliability and performance
Smart alarm contact, signals when output voltage drops more than 10%
High overload capability to ensure the protections selectivity and start-up of heavy loads

Additional information

Series
Code
Type
HS code
INPUT TECHNICAL DATA
Input rated voltage
Input voltage AC
Input voltage DC
Frequency
Current consumption
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
OUTPUT TECHNICAL DATA
Output voltage range
Output adjustable range
Continuous current
Overload limiting
Short circuit peak current
Ripple @ nominal ratings
Hold up time
Status indication
Alarm contact
Parallel connection
Redundant parallel connection
GENERAL TECHNICAL DATA
Efficiency
Dissipated power
Operating temperature range
Input / output isolation
Input / ground isolation
Output / ground isolation
Standard / approvals
EMC Standard
Overvoltage category / pollution degree
Protection degree
Connection terminal
Housing material
Dimensions (LxHxD)
Approximate weight
Mounting information
ACCESSORIES
Mounting rail (IEC60715/TH35-7.5)
Mounting rail (IEC60715/TH35-15)
APPROVALS AND MARKINGS

NOTES

Please refer to the datasheet for more details
Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance

For further information see PDF catalog

Cabur
BT003
End bracket for rail type TH35, suitable for NU1051S, NU0851S,...
Cabur BT007 END BRACKETS BT SERIES
BT007
End bracket for rail type TH35, suitable for NU1051S, NU0851S,...
Cabur BT003 END BRACKETS BT SERIES
BT005
End bracket for rail type G32 and TH35, suitable for...
CABUR PR003 MOUNTING RAILS PR SERIES
PR905
Mounting rail TH35-7,5 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR007
Mounting rail TH35-15
CABUR PR003 MOUNTING RAILS PR SERIES
PR006
Mounting rail TH35-15 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR906
Mounting rail TH35-15 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR907
Mounting rail TH35-15
CABUR PR003 MOUNTING RAILS PR SERIES
PR903
Mounting rail TH35-7,5
CABUR PR003 MOUNTING RAILS PR SERIES
PR005
Mounting rail TH35-7,5 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR003
Mounting rail TH35-7,5
Cabur TAP179W
TAP128AW
PVC adhesive tag, 8x12mm, White
Cabur TAP179W
TAP128AY
PVC adhesive tag, 8x12mm, Yellow
Cabur TAP179W
TAP159AW
PVC adhesive tag, 9x15mm, White
Cabur TAP179W
TAP159AY
PVC adhesive tag, 9x15mm, Yellow

Single-phase switching power supply with DIN-rail, designed specifically for applications in command and control panels for industrial automation and process control. Capable of delivering +60% to +80% nominal current for a prolonged period of time while maintaining a constant output voltage and equipped with a voltage threshold-controlled failure contact which is triggered when the voltage drops below 90% of the rated value. With these features and numerous international certifications, this range of power supplies enables designers to meet the requirements of the Machinery Directive EN 60204-1, allowing the protection devices connected to the output to trigger quickly, safely and selectively, thus ensuring continuity of service to the other parts of the system.

Suggested uses

  • Applications in industrial automation with high performance and reliability requirements.
  • Applications which require selectable overcurrent protections on DC lines
  • Applications in machine automation with high command and control voltage reliability and safety requirements
  • Applications in process control
  • Uses with heavy loads
  • Civil automation applications

Main features

  • The 90…264 Vac and 110…370 Vdc inputs, make it suitable for use on all power supply networks. 
  • Threshold failure contact which is triggered when the voltage falls below 90% of the rated value.
  • Versions with integrated ORing diode for redundant parallel connection, preventing the need for external devices and reducing bulk and installation costs.
  • High efficiency reduces energy consumption and the operating temperature of components and allows use in small panels and severe environmental conditions. 
  • Large power reserve allows for delivery of at least +60-80% nominal current and voltage for several minutes, ensuring safety and reliability.
  • Output voltage is adjustable and the output is protected against input surge from the DC line generated from inductive loads.
  • The output is equipped with dual electronic protection which prevents dangerous voltages for powered components in the event of an internal fault.
  • Thermal protection prevents faults in case of prolonged overload with high ambient temperatures.
  • Construction ensures excellent ventilation capacity of internal components, with reduced sizes and a degree of protection from accidental contacts of IP20 per IEC529.
  • Thanks to their high performance and excellent ventilation capacity, they are among the smallest on the market.

COOL POWER
COOL POWER

48Vdc and 72-85Vdc models have been
introduced, designed to reliably power
engines in DC. They:

  • supply peak power equal to even
    4-5 times the nominal current,
    which is required by the engine
    during the peak phase
  • have an output stage protected
    from overvoltage generated by the
    engines and drives during braking,
    which could otherwise cause malfunctions or cause the power supply to lose control over output voltage stability.

IN THE SAME CATEGORY

ISCRIVITI ALLA NEWSLETTER

Name(Required)
Email(Required)
Address(Required)
Privacy(Required)
The consent to the subscription to the Cabur Newsletter can be revoked, at any time, using the unsubscribe procedure available on the emails sent. PRIVACY POLICY

CABUR CUSTOMER CARE

for technical support
+39 019 58999.219  customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it

from monday to friday 8:30-12:30 13:00-17:00