CSG
3-phase power supplies

XCSG960D

NEW_EMPTY

1,172.00 + VAT

PCS PER PACK1

In stock

In stock

3-phase power supply IN: 3x 400–500 Vac / OUT: 48 Vdc 20 A

3-phase 400-500 Vac input or 2-phase with derating
Short circuit, overload, input and output overvoltage protections
Over temperature protection
Suitable for applications that require high reliability and performance
Smart alarm contact, signals when output voltage drops more than 10%
High overload capability to ensure the protections selectivity and start-up of heavy loads

Additional information

Series
Code
Type
HS code
INPUT TECHNICAL DATA
Input rated voltage
Input voltage AC
Frequency
Current consumption
Inrush peak current
Power factor
External protection on AC line
OUTPUT TECHNICAL DATA
Output voltage range
Output adjustable range
Continuous current
Overload limiting
Short circuit peak current
Ripple @ nominal ratings
Hold up time
Status indication
Alarm contact
Parallel connection
Redundant parallel connection
GENERAL TECHNICAL DATA
Efficiency
Dissipated power
Operating temperature range
Input / output isolation
Input / ground isolation
Output / ground isolation
Standard / approvals
EMC Standard
Overvoltage category / pollution degree
Protection degree
Connection terminal
Housing material
Dimensions (LxHxD)
Approximate weight
Mounting information
ACCESSORIES
Mounting rail (IEC60715/TH35-7.5)
Mounting rail (IEC60715/TH35-15)
Marking tag
APPROVALS AND MARKINGS

NOTES

Please refer to the datasheet for more details
Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance

For further information see PDF catalog

Cabur
BT003
End bracket for rail type TH35, suitable for NU1051S, NU0851S,...
Cabur BT007 END BRACKETS BT SERIES
BT007
End bracket for rail type TH35, suitable for NU1051S, NU0851S,...
Cabur BT003 END BRACKETS BT SERIES
BT005
End bracket for rail type G32 and TH35, suitable for...
CABUR PR003 MOUNTING RAILS PR SERIES
PR906
Mounting rail TH35-15 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR907
Mounting rail TH35-15
CABUR PR003 MOUNTING RAILS PR SERIES
PR905
Mounting rail TH35-7,5 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR007
Mounting rail TH35-15
CABUR PR003 MOUNTING RAILS PR SERIES
PR006
Mounting rail TH35-15 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR903
Mounting rail TH35-7,5
CABUR PR003 MOUNTING RAILS PR SERIES
PR005
Mounting rail TH35-7,5 with holes
CABUR PR003 MOUNTING RAILS PR SERIES
PR003
Mounting rail TH35-7,5
Cabur TAP179W
TAP209AY
PVC adhesive tag, 9x20mm, Yellow
Cabur TAP179W
TAP128AY
PVC adhesive tag, 8x12mm, Yellow
Cabur TAP179W
TAP178AW
PVC adhesive tag, 8x17mm, White
Cabur TAP179W
TAP178AY
PVC adhesive tag, 8x17mm, Yellow
Cabur TAP179W
TAP207AW
PVC adhesive tag, 7x20mm, White
Cabur TAP179W
TAP207AY
PVC adhesive tag, 7x20mm, Yellow
Cabur TAP179W
TAP209AW
PVC adhesive tag, 9x20mm, White
Cabur TAP179W
TAP128AW
PVC adhesive tag, 8x12mm, White

400…500 Vac 3-phase switching power supply for industrial automation applications. They can deliver over +50% of nominal current for a sustained period, keeping the output voltage stable and ensuring continuity of supply to the system. Equipped with voltage threshold controlled failure contact which is triggered when the voltage falls below 90% of the rated value.

With these features and numerous international certifications, this range of power supplies enables designers to meet the requirements of the Machinery Directive EN 60204-1, allowing the protection devices connected to the output to trigger quickly, safely and selectively, thus ensuring continuity of service to the other parts of the system.

Suggested uses

  • Applications in machine automation with high command and control voltage reliability and safety requirements
  • In applications which require selectable overcurrent protections on DC lines
  • Industrial automation applications
  • Uses with heavy loads

Main features

  • With 340…550 Vac/507…770 Vdc input, making them suitable for use on all power supply networks. 
  • High efficiency reduces energy consumption and the operating temperature of components and allows use in small panels and severe environmental conditions. 
  • Large power reserve allows for delivery of at least +50% of nominal current for 5 seconds maintaining the output voltage stable, ensuring safety and reliability.
  • Output voltage is adjustable and protected against incoming surge from the DC line, and is equipped with a double electronic protection that prevents damage to the powered device in case of an internal malfunction.
  • Short-circuit and overload protection designed to deliver peak currents more than 150% higher than the rated value required by heavy loads.
  • Thermal protection prevents faults in case of prolonged overload with high ambient temperatures.
  • Construction ensures optimal capacity of ventilation of internal components, extremely reduced overall dimensions and degree of protection IP20 by accidental contact according to IEC529.
TRIPLE POWER
TRIPLE POWER

Special power supplies for engines DC, Brushless, and relative drives

New 48Vdc, 72-85Vdc, and 110-180Vdc models have been introduced, designed to reliably power engines in DC. They:

  • supply peak power equal to even
    4- 5 times the nominal current, which is required by the engine during the peak phase
  • have an output stage protected from overvoltage generated by the engines and drives during braking, which could otherwise cause mal-functions or cause the power supply to lose control over output voltage stability
  • Provide output voltage at 48Vdc, and 72…85Vdc. By increasing the voltage of the engine power supply, the same power can be obtained at lower current, with notable ad-vantages for performance, engine construction, connection wires, and drives.

IN THE SAME CATEGORY

RELATED NEWS

ISCRIVITI ALLA NEWSLETTER

Name(Required)
Email(Required)
Address(Required)
Privacy(Required)
The consent to the subscription to the Cabur Newsletter can be revoked, at any time, using the unsubscribe procedure available on the emails sent. PRIVACY POLICY

CABUR CUSTOMER CARE

for technical support
+39 019 58999.219  customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it

from monday to friday 8:30-12:30 13:00-17:00