€428.00 + VAT
In stock
In stock
Output relay module IN: Modbus RTU/ OUT: 4 NO or NC contacts
| Series | CIO |
|---|---|
| Code | XCIO4RLYMB |
| Type | CIO-4RLY-MB – |
| HS code | 85043129 |
| INPUT TECNHICAL DATA | |
| Signal type IN | Modbus RTU |
| Input impedance IN | 56 Ω |
| OUTPUT TECHNICAL DATA | |
| Signal type OUT | 4 NO or NC contacts (programmable) |
| Output range OUT | 2A @ 30 Vdc / 0.3A |
| Maximum output signal OUT | max. 2A 110 Vdc / 2A 125 Vac |
| Status indication | LED |
| Parametrization OUT | Software CaburLab (1) |
| GENERAL TECHNICAL DATA | |
| Power supply voltage | 24 Vdc (8…30 Vdc) |
| Current consumption | 100 mA (24 Vdc) |
| Accuracy | 0.1% FSR (23°C) |
| Linearity error | < 0.1% FS |
| Transmission frequency | 10 Hz |
| Resolution | 13 bits |
| Baud rate | 1200 – 230400 bps (programmable) |
| Parity | None, Odd, Even, Mark, Space |
| Operation temperature range | -20…+70°C |
| Insulation | 1.5 kVac / 60 s |
| Insulation type | 3-way (IN / OUT / power) |
| EMC Standard | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3 |
| Overvoltage category / pollution degree | II / 2 |
| Protection degree | IP 20 |
| Connection terminal IN / OUT | 2.5 mm² / 2.5 mm² (screw) |
| Housing material | UL94V-0 plastic material |
| Dimensions (LxHxD) | 101x79x17.5 mm |
| Approximate weight | 100 g |
| Mounting information | vertical on a rail, distance 5 mm from adjacent components |
| ACCESSORIES | |
| Mounting rail (IEC60715/TH35-7.5) | PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB |
| APPROVALS AND MARKINGS |  |
For further information see PDF catalog
Modbus-RTU programmable analog converters
The XCIO4 devices are analog converters, fully programmable through a PC application and with ModBus communication inter-face.
There are different models:
Each device has up to four independent channels, it is remotely configurable through the ModBus interface and in alternative with a uUSB port with no need for additional power supply.
The devices are fully programmable by means of CaburLab software application or directly accessing the ModBus registers by means of a PLC.
The XCIO4RLYMB can be configured to have a default safe condition called safestate that allows to set the state of the output when the power is off and/or when the device is remotely controlled.
Communication bridges
The XBRI series is based on two different interconnection bridge typologies.
The XBRIRS485CP is a gateway which allows the connection between RS-485 interconnected devices towards a ModBus-TCP over Ethernet network .
The XBRIRS485ET and XBRIRS485WI are bridges with the capability to connect RS-485 devices to a 10/100 Base T Ethernet network based upon TCP/IP.
The Ethernet – RS485 communication passe through a virtual communication interface. The bridges parameters can be configu-red through a dedicate telnet interface (IP address, subnet mask, etc.).
Ethernet Switches
The XSWET5UP and XSWET5UP series of Din-rail Entry-level Unmanaged Ethernet Switches for industrial applications are highly compacted 5 and 8-port Ethernet switches that support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, RJ45 ports.
The XSWET5UP and XSWET5UP switches are rated to operate at temperatures ranging from -10 to 60°C. The switches can be easily installed on a DIN-rail as well as multi-directional panel mounting.
The new devices are specifically designed for the industrial applications and complete the current range of unmanaged Ethernet switches for DIN-rail.
The polyamide used in Cabur terminal blocks has obtained the V-0 classification even for the minimum thicknesses used, guaranteeing the self-extinguishing maximum degree of the product.
The Company, which has over 70 years of history in the field of electrical connections, has been dealing with renewable energy for its Customers since 2008. It has always paid particular attention to the environmental performance of its own production process and the sustainability of its business.
Copyright © Cabur srl Sede legale Località isola Grande, 45 – 17041 Altare (SV) – Italia – Tel. 019-589991 – Fax 019-58999233 – E-mail: info@cabur.it
Cap. Sociale: €2.000.000 Int. versato – Reg. Soc. Trib. Savona N° 4635 – C.C.I.A.A. N° 27269- Export N° SV 000532 – P.IVA e Cod. Fisc.: 00100760099
DISCLAIMER Cabur Srl may change and update any document available online without any obligation to inform users. Only cabur.it and cabur.eu domains are registered and maintained by Cabur srl. Cabur has no responsibility for contents published on sites under the same name, with different extensions from .it and .eu
for technical support
+39 019 58999.219 customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it
from monday to friday 8:30-12:30 13:00-17:00
